ATX QFOT1310 Specifications download pdf (Page 19)

SNMP MANAGEMENT

With the built-in SNMP interface board, QFOT1310-S can be viewed by SNMP software via the RJ-45 port at the rear

panel.

8.1. IP Address

8.1.1. The QFOT1310-S transmitter default IP address for SNMP management is “192.168.1.20”. The Ethernet Interface hardware

and TCP/IP features are as follows:

1) InterfaceType: RJ45

2) Speed Rate: 10Mbit/s

3) Default IP Address: 192.168.1.20

4) Default Mask: 255.255.255.0

5) DefaultGateway: 192.168.1.1

8.1.2. SNMPAgentNetworkManagementSystem

The standard SNMPv1 agent is provided in the built-in SNMP interface board, which can be accesssed by the standard

SNMP network management tools. SNMPv2 is optional. The parameters of QFOT1310-S can be read by a SNMP software

with management information base (MIB), including RF parameters, power information, temperatures, etc.

8.2. Setting Private IP Address

The user can change the QFOT1310-S IP address in the following ways.

8.2.1. TELNET Management

QFOT1310-S transmitter supports TELNET management. When QFOT1310-S is connected with a computer via RJ-45, the

computer IP address should be next to “192.168.1.20”. After both units are linking well, the user can enter the command line

in the DOS window:

“telnet 192.168.1.20”, where the “192.168.1.20” is the default IP address of QFOT1310-S.

After successful connection, the user name and password is required.

The default username: admin

The default password: 12345

Now the prompt window is OK, user can enter different operation command.

Commands Parameter Description Appendix

Exit / Exit the management console

Carrier Return / Indicate the command was entered

Admin / This is only valid for username prompt The device has only one username: admin

12345 / This is only valid for password prompt The device has only one password: 12345

Logout / Logout the console and login prompt

window appear again

Help / Show the help window

? / Same as command “Help”

Ver / Show the version information of device

Set IP xxxxxxxx

Gateway xxxxxxxx

Mask xxxxxxxx

Set IP address

Set Gateway address

Set Mask

“xxxx” is the IP address or mask, they can be

like this:

192.168.1.2

255.255.255.0

Show / Show basic information

Set Model “xxxxxxx”

Model

Set the Model

View the Model

When setting the model, the string must

include quotation mark, and the max string

length is 12

CHAPTER 7: INSTALLATION & MAINTENANCE

Q-Series

Optical – QFOT1310 Series Broadcast Transmitter – Installation & Operation Manual 8-1

CHAPTER 8: SNMP MANAGEMENT

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 29 30

Comments to this Manuals

No comments

ATX QFOT1310 Specifications Page 19

Comments to this Manuals